We offer a range of portable blasting machines able to cope with virtually all types of blasting environment. Whether onsite, where the need is for maneuverability, or in a fixed environment such as a blast room. Tried and tested throughout the world the Speed co-range of blast machines combines rugged efficient operation with maximum site safety.
|SC101||15US||711||254||Smallest in our range, this machine is ideal for remedial work, glass etching and general maintenance. Easily transported this machine has a blast time of approx.1 0-15 minutes ..|
|SC102||45US||1061||357||With a continuous blast time of 20/25 minutes, this machine is ideal for the small to medium contract where mobility yet high production is required.|
|SC103||100US||1061||508||This machine is designed for the medium contractor. It has a continuous blast time of 35-40 minutes.|
|SC104||200US||1346||610||The largest machine of our standard range, this machine offers a continuous blast time of 45-50 minutes. Ideal for shipyards, oil refineries, gas and heavy fabrication industries.|
- Designed for non-stop blasting
- Available in many standard sizes
- Pressure or suction with many factory options
- Smooth surface finish
FLOOR BLAST MACHINE
- Cleaning Width: 13"/33cm
- Travel Speed:O-60 ft/rnln. 18 rn/rnin
- Production:2000 ft2/hr, 186 m2/hr
- Voltage:240v / 480v 380v / 550v / 60hz 3 phase 50hz
- Power Cord:50 ft!l5 m
The Wet Blasting Machine operates like
an abrasive blasting machine, but with the
added benefit of water. This combination of water
and media prevents dust heat generation,
decreases non-productive time and provides
a significantly smoother finish.
SODA BLAST MACHINE
- Marine hull preparation - effective for removing antifoul
andcleaning underwater surfaces.
- Public Works - effective for graffiti removal and
delicatesurfaces such as sandstone.
- Engineering - de-painting for non destructive weld testing,
cleaning of equipment/engine parts.
- Building renovation, paint removal and maintenance.
- Automotive industry - vehicle restoration and paint removal.
SAND BLASTING GUNS
Ideal for all tasks which involve cleaning, scraping,
removing rust paint mold or stubborn dirt
preparing materials such as wood,
steel, aluminium, plastic, etc ...
AIR AFTER COOLER
- Blasting and spray painting systems
- Oil and petro-chemical industry
- Construction and Maintenance
- Special industrial equipment
- Breathing air
- Down stream of high efficiency
Speedco Air Cooled After Cooler SC/RA Series.
|SC/RA 200||20000||1200||706||2105||490||615||1600||360||11000||DN 80||240|
|SC/RA 250||25000||1500||883||2105||490||615||1600||360||11000||DN 80||250|
|SC/RA 300||30000||1800||1059||2060||490||945||1972||420||11000||DN 100||280|
|SC/RA 400||40000||2400||1413||2060||490||945||2202||420||17400||DN 100||300|
|SC/RA 500||50000||3000||1766||2000||556||1020||3245||445||21000||DN 125||310|
|SC/RA 650||65000||3900||2295||2000||570||1020||3245||445||21000||DN 125||390|
|SC/RA 750||75000||4500||2649||2000||560||1020||3326||524||21000||DN 150||390|